A more strat-approached design with a more rounded body-end and a tilted head. It have also deeper cut on the body top for better reach to the higher frets. The neck are thick and wich contributes to a good sustain.
| GENERAL | |
|---|---|
| Guitar No | 3 |
| Build Year | 2009 |
| Weight33 | 3 kg |
| COLOR | |
|---|---|
| Color/Stain | Orange/Red grain-enhancing stain ColorTone |
| Finish | ColorTone Waterbased Clear Lacquer (26 layers) |
| HARDWARE | |
|---|---|
| Pickup neck | Single Coil DiMarzio The Cruiser® DP186 (Black) |
| Pickup bridge | Humbucker DiMarzio D Activator-X™ DP222, F-spaced (Black) |
| Hardtail | N/A |
| Tremolo | Kahler 2300 (Gold) |
| Tuners | 3L/3R, Sperzel Trim-lok, 12:1 ratio (Satin gold) |
| Controls | 2 Master Volumes & 1 Master Tone (Gold) |
| Setup | Set 1: Bridge, Set 2: Bridge + Neck, Set 3: Neck, Push-pull for bridge volume and phasing. |
| Switch | 3-way Pickup Switch – Switchcraft (Gold) |
| Pots | 2 CTS 500k-ohm + 1 push-pull 500k-ohm (Volume for the bridge) |
| Preamp | N/A |
| Capacitor | 0.022 µF – Ceramic |
| BODY | |
|---|---|
| Material | Curly Alder |
| Chambered | No |
| Cover plates | Transparent Plastic |
| NECK | |
|---|---|
| Material | Curly Maple |
| Neck shape | U-shaped (Thick) |
| Neck enforcement | 4 mm Allen Nut Hot Rod (18″) + 2 carbon fiber neck rods (1/8″ x 3/8″ x 18″) |
| Neck joint | Bolt-on (Neck mounting plate + plastic plate) |
| Nut | ABM 6210 Webster Nut LP Style |
| Measurements | 1st fret: 42 mm, 24th fret: 57 mm |
| Fingerboard | Ebenholtz |
| Inlays | 6 mm Round dots – White pearl (MoP) |
| Scale lenght | 25.5″ |
| Fretboard | Compound Radius, 10″ to 14.5″ |
| No of frets | 24 |
| Fretwire | Wide/Highest, Nickel/silver |
